Information

Written from the bench, not the marketing department

Three running categories. Repair and diagnosis, job playbooks, and honest equipment comparisons — all of it from machines that actually came through our shop.

The Shop FloorRepair, troubleshooting, and part identification. One failure mode or one component per post, written from what actually comes across our bench.3 posts → Job-ReadyApplication playbooks. How a specific job gets done, with the equipment and chemistry called out.3 posts → Spec SheetBuying decisions and honest comparisons. What to buy, what to skip, and why.3 posts →

Latest

The Shop Floor
Aug 31, 2026

Your pressure washer won't build pressure. Six things to check, in order.

A machine that runs fine but won't make pressure is the single most common call we get, and it is almost never the pump.

Spec Sheet
Aug 31, 2026

3,000 or 4,000 PSI? You probably need GPM, not PSI.

Most people shopping for more pressure are short on flow and do not know it yet.

Job-Ready
Aug 30, 2026

Washing a 20-truck fleet in January without freezing your lines.

Winter fleet work is good business precisely because it is inconvenient. Here is how to do it without destroying equipment.

The Shop Floor
Aug 29, 2026

Unloader valve or thermal relief valve? They do different jobs and people mix them up.

Two cheap parts that get confused constantly — and confusing them is how people end up replacing the wrong one twice.

Spec Sheet
Aug 29, 2026

Skid, trailer, or truck mount for a two-man crew.

The format decision you live with every day for five years, and the tradeoffs nobody mentions at purchase.

Job-Ready
Aug 28, 2026

Cleaning a dairy parlor: temperature, chemistry, and what the inspector looks for.

Agricultural washdown is non-discretionary spend — the parlor gets cleaned whether or not it has been a good year.

The Shop Floor
Aug 27, 2026

The burner won't fire on a cold morning. Start here.

Cold-weather burner failures follow a predictable order, and the answer is usually near the top of it.

Job-Ready
Aug 26, 2026

Getting rust stains off concrete without etching it.

Rust removal is a chemistry problem. Solve it with pressure and you will leave a bright etched patch that looks worse than the stain did.

Spec Sheet
Aug 25, 2026

What we check before a used hot water machine goes on the floor.

We publish this list because you should be able to run it on any machine you are considering — from us or from anyone else.